Plan

1. Contractor submits drawing for review and proposal development
2. If the drawings do not include electrical, we recommend electrical devices and lighting
3. Additional communications may take place to address project requirements, scope and expectations
4. Initial meeting to discuss project requirements, scope and expectations.

System Design

1. Develop, submit and approve detailed proposal
2. Further communication back and forth regarding changes / additions / budget
3. When proposal has been accepted, time lines are determined.
4. Apply for necessary permits
5. Product selection and procurement
6. We submit to the builder and/or homeowner a Rough in Check List for specific equipment and appliance specs to double check that we have allowed for the correct items

Install

1. Mark out the electrical
2. Once framing is completed, and while other trades before us are working on their rough-ins
3. Identify any changes required, update pricing

Pre-insulation / Rough-in

1. Install electrical wiring
2. Install prewiring for all systems
3. Install temporary lighting and power for temporary heat if necessary

Post-wall construction

1. Take-off of the devices that have been roughed in
2. Any changes at this stage will require update pricing
3. Installation of electronic components, devices and fixtures

Complete

1. Conduct system testing
2. Receive project inspections and approvals
3. Initiate warranty procedures
4. Final site meeting, provide equipment tutorials and panel schedules

Evaluate

1. Assess project success: analyse project plan against actual results (time, budget, issues management…)
2. Continuous improvement: apply key learnings to staff training and future projects

Learn more about each our specific processes below:

Automation Process
Commercial Process
Residential Process
Restoration Process